Find a professional home automation and security technician near you

Replacing the battery of the fire alarm in apartment

Hi, I've got two wired fire alarm systems in my unit that need to be replaced with newer units. The current units are wired.

I need to install new fire alarms for a 4 bedroom house

My boyfriend needs his alarm system reset. He accidentally changed the password and triggered the alarm. To make the alarm siren stop he had to cut the wire for the battery and shut off the main power switch supplying the alarm. It is a Hills NX-16 System. When he turns the main power on the siren sounds again.

Description: I need someone experienced with older smoke alarm / alarm panel systems to inspect and diagnose a fault in my house. One ceiling smoke alarm has been intermittently chirping, and the frequency is getting worse. It started at around once every 30 to 60 minutes, and now it is about once every 10 minutes. When it chirps, the central alarm panel also sounds and the fire light comes on, so the detector and panel appear to be linked. This does not seem to be a simple battery replacement job. It looks like an older hard-wired linked system with a central panel. I have already checked the visible smoke alarm housing and could not find a normal user-replaceable battery compartment. The system also appears to be quite old, and I cannot identify the brand or installer. What I need: • inspect and diagnose the faulty detector / panel / circuit • confirm which power circuit it is connected to • safely isolate the fault if required • advise whether repair is possible or whether replacement is the better option Please only respond if you have experience with: • smoke alarms • hard-wired detectors • older linked alarm systems • alarm panels / fire indicator faults This is mainly a diagnosis and fault-finding job first, not just a basic battery replacement. Please quote for inspection/diagnosis, and then advise repair or replacement options after checking on site.

Need someone to Fix exhaust fan in our toilet and to put back fire alarm in the ceiling + Fix door handles + fix a broken standing desk. The standing desk will need a new battery or box that makes it go up and down

Installation of one home security camera, need to connect electricity

I have a Paradox K37 keypad module. The Paradox base kit is a Magellan MG 5050. It's been playing up and I need a complete reset. It has 4 internal motion sensors, and an outside X2 Combo Siren & Strobe.

Help to set up security camera connection

I have 3 sets of security cameras I need someone to come and help Me setup / drill / sync up to my phone etc Need someone with the tools (drills) and someone who is savvy in helping me get this synced up. (By an off chance it doesn’t work, need help to install new cameras in my house ) Time; To be done, tomorrow Saturday around 130pm at my place Malvern east

Change fire alarm battery which is on the ceiling at about 3.5m height, so a tall enough ladder is needed. You will need to bring your own ladder! May need to allow enough time to go buy the appropriate battery.

Need to replace 4 fire alarms Need to add new power boards in 2 rooms

Replace expired fire alarm

Install 6 lithium battery powered smoke alarms into two story home. We will supply the alarms. https://www.bunnings.com.au/firepro-connect-10-year-lithium-wireless-interconnect-smoke-alarm-2-pack_p0758724?store=7378&gclsrc=aw.ds&gad_source=1&gad_campaignid=21122993677&gbraid=0AAAAADtbEB8GxDPbfnHw-j8GQ6BrOCpkY&gclid=Cj0KCQiAvtzLBhCPARIsALwhxdrGN2tbzM-sLYtUbG4evYBaYed-cL5b-7hpoT_vdwc5xMfgVYs2SKUaArRiEALw_wcB

Home security alarm needs to be reset as previous tenants changed settings and security codes also. I am the new owner. I have two remotes both not working. It's Bosch with 4 sensors. I also have booklet also.

Fire alarm is beeping and needs battery change

4 camera’s to be installed and mounted

Hi Taskers, I need a electrical professional to install a Eufy Wireless CCTV Advanced Security Kit and a Eufy Video Doorbell C3T (with chime) at my 2 flooe home in Marsden Park. 💼 Equipment to Install: 2 x eufyCam 3 (S330) 1 x HomeBase 3 1 x SoloCam S340 (pan/tilt solar) 1x Eufy Video Doorbell C3T with Chime Job Scope: 1. Install outdoor cameras 2. Mount securely 3. Connect and configure HomeBase 3 switch 4. Install video doorbell at front door

Installation of security wireless cameras. 1 in garage facing driveway, backyard and verandas

Replace the cover of 1 electric switch, Check and replace the batteries of 3 fire alarms. Also we have 8 cables around the hosue which were meant to be part of a home security system- I want these cut so we can paint over them (pictured in 2nd photo)